Search

Inclined Plane Tracking and Erosion Tester
as per ASTM D2303, IEC 60587

Precision High-Voltage Inclined Plane Tracking and Erosion Analyser setup is designed to cover test method for the evaluation of the relative tracking and erosion resistance of insulating materials as per ASTM D2303-97, IEC 60587 & EN-50397-1

Inclined-Plane-Tracking-and-Erosion-Tester
High-Voltage Inclined Plane Tracking & Erosion Tester as per ASTM D2303, IEC 60587 - 5 Station

SCR Elektroniks, Precision High-Voltage Inclined Plane Tracking and Erosion Tester as per ASTM D2303, IEC 60587 & EN-50397-1 is designed to cover test method for the evaluation of the relative tracking and erosion resistance of insulating solid using liquid contaminant as per ASTM D2303-97, IEC 60587 & EN-50397-1

As per standard ASTM D2303 insulating material should withstand against tracking & Erosion on the field. Which is why they are evaluated in a laboratory by means of liquid contamination in a particular arrangement. The equipment displayed herewith are used for the same purpose. A high voltage is applied between two electrodes and a liquid contaminant is used in between so as to check & measure tracking. We offer this system in various configurations based on your application – R&D or Compliance Test & Assessment.

Get A Quote

The routines/measurements that can be conducted under High-voltage Inclined Plane Tracking and Erosion Tester are:

  • Initial Tracking Voltage
  • Time to track
  • Erosion

In Initial Tracking Voltage test, as per clause 9.0 of ASTM D2303, test voltage is applied to the electrodes and is gradually increased in steps till the insulation fails. A qualified operator observes & records the character of the track and the appearance of the test specimen. For detailed explanation, please refer ASTM D2303, IEC 60587 and EN-50397-1.

In Time to Track test, a constant specified test voltage is applied and the tracking time is recorded.

In erosion test, a test voltage lower than the voltage required to break the insulation is applied for an extended period of time.

The object here is to measure the erosion as a function of time of voltage application. Please contact us for a free consultation regarding test methods in ASTM D2303, IEC 60587 and EN-50397-1

Salient Features

  • “Microcontroller based programmable logic controller” to carry out test sequence having 20 *4 LCD and membrane keypad for display of set test parameters and test status.
  • Specially designed electrodes as per product under test.
  • Lighting arrangement in test chamber.
  • Facility to easily calibrate the system for voltage as well as time calibration..
  • Takes care of the test procedures as per ASTM D2303, IEC 60587 and EN-50397-1
  • Seven segment LED display for voltage and current indication .
  • Enclosures: Built with aluminium profile and MS covers with powder coating

Specification

  • Input supply : 1 phase 230V AC, 50Hz.
  • Output voltage : Regulated 100 V to 7500V, @100mA AC programmable.
  • Series ballast selection – 1k, 10k, 20k, 22k, 33k and 50k with link.
  • Tripping current setting : 30mA OR 60mA
  • Electrode system : stainless steel material.
  • Angle of inclination : 45 deg.
  • Fixture arrangement: Made for flat test specimen as well as for various sizes of cable. 
  • Liquid deliver capacity: 0.075 ml/ min to 0.900 ml/ min, programmable
  • Test chamber : UV protected Glass door with door interlock.

High-Voltage Inclined Plane Tracking and Erosion Tester Variants

Single Station - High-Voltage Inclined Plane Tracking and Erosion Tester - Micro Controller Based

Single Station - High-Voltage Inclined Plane Tracking and Erosion Tester - PC Based

Two Station - High-Voltage Inclined Plane Tracking and Erosion Tester - Micro Controller Based

Two Station - High-Voltage Inclined Plane Tracking and Erosion Tester - PC Based

Customization

The test bench can be customized as per number of stations 1, 2,& 5 and can also be customized with Micro controller based or PC based

PC Datalogging Comprise of:

  • PC Operated System through NI DAQ or SCR make DAQ system with Labview Software.
  • Programmable Features for, INITIAL TRACKING VOLTAGE TEST, TIME TO TRACK TEST & EROSION TEST.
  • Software Feature includes user hierachy and password protection, preconfigurable test recipes and setting, automatic and quick selection of test recipe with auto-upload of values, actual test and result screens with waveforms, test reports exportable to excel formats, diagnostic checking of the test bench system etc
  • Fully automatic system with minimum user controls / adjustments.

Application Note

The tester is used to test insulation testing of special purpose cables such as armoured cables. It can also be used for conventional cables. The tests covered are Time to track test , Initial tracking voltage test and Erosion test.

  • The test is crucial for qualifying materials intended for use in outdoor high-voltage insulation applications
  • It's used to study the tracking and erosion behavior of different materials and formulations, helping to develop improved insulators. 
  • The test helps assess the performance of existing insulator designs and materials, ensuring they can withstand the harsh conditions
  • The Test is used to ensure that materials meet specific standards and requirements related to tracking and erosion resistance. 

Simalar Products

Water-tree growth resistance tester – ASTM D 6097

Water-tree growth resistance tester – ASTM D 6097

SCR Elekroniks have developed a Testing Setup to carry out the standard test method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials as per ASTM D6097

High-Current-Arc-Ignition-Test-Apparatus-as per-UL-746-A

High Current Arc Ignition Test Apparatus

SCR Elektroniks have developed High-Current Arc Ignition Test Machine is used for evaluating Ignition Performance Level Category as per UL 746A.

High-Voltage-Inclined-Plane-Tracking-and-Erosion-Tester-as-per-ASTM D2303

High-Voltage Inclined Plane and Tracking Erosion Tester

SCR Elektroniks have designed this setup to cover test method for the evaluation of the relative tracking and erosion resistance of insulating solid using liquid contaminant as per ASTM D2303-97, IEC 60587 & EN-50397-1

Get A Quote

Get A Quote