SCR Elektroniks has developed a PC based motor starter test bench to check the continuity of the motor starter against over current. The bench is customizable for 3, 5, 6 and 12 stations.
The test bench is used to test motor thermal overload starters capable of interrupting overlaod current.
SCR Elektroniks presents you the thermal overload relay test bench in a sophisticated testing topology like never before!
The bench has a facility to test multiple relays simultaneously and independently of each other in a modular fashion.
The system can be chosen as AC current based or DC current based. Also, the number of stations and current range can be customized. The PC software and pneumatic fixture are designed as per the customer specifications.
The bench is used to verify the exact time – current tripping band both at minimum and maximum setting.
The SCR Elektroniks make relay heating test bench is a low cost heating test bench to test the continuity of bimetallic overload relays against over current. The bench is customizable for 5, 6, 12, 24 and 48 stations as per the customer requirement.
The current range and number of stations can be customized. Also, fixture will be designed as per the customer product.
The bench helps to check the heating and overload contact mechanism characteristics.
The bench is mainly to be utilized for the production testing of bimetal overload relays used to break current using an overload current operated bimetal device, typically for motors and pumps. The circuit employs a typically designed servo controlled current source which pumps the required current at a convenient low voltage.
The bench can be customized for the maximum testing current range and the number of stations. It can be made PC based with data logging if necessary.
The test bench is designed to test bimetallic overload relays for their thermal overload characteristics
