Surge Test Apparatus

The equipment is designed for interference test as per IEC 60065

Surge Test Apparatus as per IEC 60065

The SCR Make Surge Current Testers are designed for interference test as per IEC 60065. Surge Tester is intended for testing of insulating materials, and for testing of particular components in mains operated electronic apparatus for household and telecommunication. This is tested with high voltage surges 10kV.

The Surge Testers will produce a current surge with the required wave-shape of 8 / 20 microsecond, meaning a high current surge with 8 microseconds rise time and 20 microseconds fall time.

High voltage switch with IEC 60065 circuit is located in solid, isolated housing made of Plexiglas, so that it is protected from dust. Due to the transparency monitoring of high voltage switch is possible. The switch is mounted on top of sheet steel housing that consists control unit and high voltage source.
Programmable DC High Voltage Source.
The arrangement of switch electrode is as shown figure 5b of IEC 60065. Brass sphere and contacts of high voltage switch are gold plated to avoid oxidation.
Electric circuit as per figure 5a of IEC 60065.
SCR Elektroniks make Logic Controller for adjusting the number of discharges and their rate.

Output Voltage : 0 – 10KV (Programmable) through logic controller
Parameters Setting :
1) Time interval between two surges default– 2.5 Sec. (Max. 99.99 Sec.)
2) No. Of discharges default – 50 Count (Max. 9999 Count)
No. of discharges : Count 50 maximum, (max 9999)
Power Consumption : 50VA

Customised Model for Impulse Voltage Tester, Impulse Voltage Tester with Current Surge as per the Standards mentioned below:

Sr. No.	Description	Model
1	Impulse Tester 1.2/50µSec
	a) 6kV (1.2/50 µSec) Energy Max. 18J	IT 6A
	b) 10kV (1.2/50 µSec) Energy Max 50J	IT 10A
	c) 12kV (1.2/50 µSec) Energy Max 70J	IT 12A
	d) 15kV (1.2/50 µSec) Energy 112J	IT 15A
	e) 20kV (1.2/50 µSec) Energy 200J	IT 20A
	f) 6kV (1.2/50 µSec) a) Energy Max. 18J & b) Energy 0.5J	IT 6A EM

2	Impulse Tester 6.5kV 1.2/50 µSec with Current Surge 8/20 µSec (Combination Waveform)	ITC6A
	Impulse Tester 10kV 1.2/50 µSec with Current Surge 8/20 µSec (Combination Waveform)	ITC10A
3	Impulse Tester 10/700µSec
	a) 6.5kV (10/700µSec)	IT6B
	b) 10kV (10/700µSec)	IT10B

4	a) Impulse Tester 6.5kV 10/700 µSec with Current Surge 5/320 µSec (Combination Waveform)	ITC6B
5	Impulse Test 6.5kV (1.2/50 µSec & 8/20 µSec with Online with POW and CDN as per IEC 61000-4-5 (Combination Waveform)	ITC6/N
6	Ring Wave Generator with CDN as per IS 12640-1: 2016 / IEC 61008-1:2012	RWG-6
7	Surge Tester 10kV as per IEC IEC 60065	ST10

Standard & Titles

Standard	Title
IEC 61000 – 4 – 5	Electromagnetic Compatibility – Testing and Measurement Techniques – Surge Immunity Test
IEC 60065	Audio, video and similar electronic Apparatus
IEC 60335	Functional safety standard for electrical appliances for and similar purposes.
IEC 60947 – 1	Low Voltage Switchgear and Controlgear
IS 13252-1 / IEC 60950 – 1	Information Technology Equipment – Safety
UL 60950 – 1	Information Technology Equipment – Safety
BS 61180	High Voltage Test Techniques for Low Voltage Equipment

Surge Test Apparatus

The SCR make Surge Test Apparatus is intended for testing of Insulating materials, and for testing particular components in mains operated electronic apparatus for household & telecommunication. This is tested by High Voltage Surges 10kV

Surge Test Apparatus

The equipment is designed for interference test as per IEC 60065