Simalar Products
Spring Hammer Impact Tester as per Cl No. 21 of IS 302-1
SCR ELEKTRONIKS make Mechanical Shock Test Apparatus is designed to test MCBs, ELCBs as for resistance to mechanical shock as per. IS 8828:1996 clause 9.130, IEC pub 898 (1995) also IEC 60898-1 : 2015 Clause No. 9.13 & IEC 61008-1 Clause No. 9.12.1
The over all construction is similar to fig. 8 of IS 8828. The mounting on vertical plate is such that the vertical height can be adjust up to 250mm (Normal distance 180mm). Similarly adjustment is provided to adjust horizontal distance of vertical plate from pivoted between 150m to 250mm/ (normally 200). The spring is with 25N/mm constant. Motorized arrangement is made so that dropping height is 40mm.and the speed is adjusted that the time between two drops is good enough for test sample to come to test. Digital preset counter is provided to count the number to drops. This facilitates to set the number of drops after which the test is terminated.
The product is designed as per the specifications and drawings in the relevant standard
The tester tests strength and resilience of the domestic appliance / switchgear / wiring accessory under test against striking force derived from a mechanically charged spring hammer
SCR ELEKTRONIKS make Mechanical Shock Test Apparatus is designed to test MCBs, ELCBs as for resistance to mechanical shock as per. IS 8828:1996 clause 9.130, IEC pub 898 (1995)
