Search

Tumbling Barrel Apparatus as per Clause No. 24.2 of IS 1293:2019

Tumbling Barrel Apparatus covered in standard IS 1293, IS 3854, IEC 60669-1 & IEC 60884-1 is specially designed to determine mechanical strength of test samples

Tumbling-Barrel-Test-Apparatus
Tumbling Barrel Apparatus as per Clause No. 24.2 of IS 1293:2019

SCR Elektroniks make Tumbling Barrel Apparatus is specially designed and manufactured for use in laboratories involved in testing Appliances, Electrical Accessories, Luminaries and other related Electro technical products. It is used to perform the test specified in many standards to determine compliance with safety requirements, particularly mechanical strength of test samples.

The setup is covered in standard IS 1293, IS 3854, IEC 60669-1 & IEC 60884-1.

Get A Quote

It consists of a barrel, with a shape and dimensions as specified in the relevant standard. The barrel is rotated about its central axis by a motor such that its speed is five revolutions per minute. The test sample placed inside the barrel will undergo repeated falls from a height of 500 mm on the steel plates fitted inside the barrel. The numbers of fails are programmed with the help of the digital preset counter, which will stop the barrel rotation after the preset numbers of fails are achieved. The equipment has several safety and operational features that make it one of the most advanced equipment of its type. The apparatus is housed in a rugged enclosure affording very high mechanical rigidity and strength. The enclosure and panels are epoxy powder coated / anodized for long-term protection.

Salient Features

  • Self contained compact unit that can be floor mounted.
  • Laminated wooden barrel mounted on a sturdy support frame.
  • Motorized operation enables ease of use.
  • Rotation Speed of five RPM, providing a fall rate of ten falls per minutes.
  • Steel base plate fixed at both ends of the barrel as specified in the standards.
  • Digital pre-set four digits counter with bright LED duel display, membrane keypad selection and battery back-up to memorize count value in case of power cut off.
  • Audible / Visible ‘Find of Test’ indication.
  • Transparent acrylic sliding cover allows easy loading and unloading of the test sample and allows inspection during the test. Cover can be locked during the test.
  • Two castor wheels and one adjustable foot provide mobility as well as leveling facility.
  • Non contact proximity sensor ensure reliable operation Barrel JOG Switch to bring the barrel to upright position after End of Test.

Specification

  • Drop Height : 500 mm
  • Base Plate : 3 mm thick Steel Plate.
  • Rotation Speed : 10 Falls per minute (5 rpm)
  • Control : Digital Pre Set Counter, 4 digit, with battery back-up.
  • Sensor : Non contact Inductive Proximity Sensor, 18 mm diameter.
  • Indicator : Power ON, Barrel ON, End of Test (Audible beeper)
  • Access : Through sliding acrylic cover with magnetic latch & key lock.
  • Drive : AC Induction motor, geared, with reduction pulley and V-Belt.
  • Power : 230 V AC, 50 Hz single phase.

Simalar Products

Auto-Flexion-Tester

Motor Operated Pull Out Test Setup for Flexion as per IEC 60947-1

Pendulam-Impact-Test-Apparatus

Pendalum Impact Test Apparatus

Tumbling-Barrel-Test-Apparatus

Tumbling Barrel Apparatus as per Clause No. 24.2 of IS 1293:2019

The SCR make Tumbling Barrel Apparatus is specially designed and manufactured for use in laboratories involved in testing Appliances, Electrical Accessories, Luminaries and other related Electro technical products.

Get A Quote

Get A Quote